STEEL BAR STRAIGHTENING CUTTING AND BENDING HOOP MACHINE SCBH-512 a steel bar straightening, cutting, and bending machine for producing hoops and stirrups automatically. It processes bars within its rated range at high speed with precise angle accuracy, powered by a powerful system for efficient production.
2. Technical Specifications
Item
Specification
Model
SCBH-512
Scope Of Straightening Steel Bar
5-12mm
Angle Accuracy
±1°
Single Hoop Speed
160m/min
Power
28KW
Machine Quality
2200kg
Steel Bar Collection Size (mm)
6000×650×500
3. Intended Use & Applications
STEEL BAR STRAIGHTENING CUTTING AND BENDING HOOP MACHINE SCBH-512 is used for hoop and stirrup production in:
Rebar fabrication workshops
Construction sites producing stirrups
Hoops and shaped reinforcement
Columns, beams, and foundations
4. Operation Guide
Set up the machine on a level, stable surface and verify the power supply.
Load the steel bar coil or straight bars according to the feed guide.
Set the hoop size, bend angle, and quantity on the control panel.
Start the machine and monitor the first few hoops for accuracy.
Adjust settings as needed and continue production.
Note: Use bars within the rated straightening and bending range. Verify hoop dimensions against the structural drawings.
5. Safety Instructions
Warning: This machine has rotating and bending components. Serious injury can occur if misused.
Operate the machine only after reading this manual and receiving proper training.
Wear safety goggles, gloves, and protective clothing when operating.
Keep hands and loose clothing away from the feed and bending area.
Disconnect power before cleaning, adjustment, or maintenance.
Never operate the machine with safety guards removed.
Use only genuine Creare replacement parts.
6. Maintenance
Inspect the straightening rollers, cutting blades, and bending dies before each shift.
Lubricate moving parts according to the maintenance schedule.
Check drive belts and fasteners periodically.
Keep the machine clean and free of scale and debris.
Store the machine in a dry, covered area when not in use.
