Scrap Steel Bar Straightening and Cutting Machines SC 4-14 SSB a steel bar straightening and cutting machine engineered for high-volume rebar processing. It straightens steel bars within its rated range at high traction speed, driven by powerful motors for smooth, continuous operation in busy fabrication environments.
2. Technical Specifications
Item
Specification
Model
SC 4-14 SSB
Straightening Diameter
Φ4-14mm
Straightening Speed
28m/min
Total Power
5.5kw（2.2kw）
Weight
720kg
Dimension
1180×700×1280mm
3. Intended Use & Applications
Scrap Steel Bar Straightening and Cutting Machines SC 4-14 SSB is used for straightening and cutting steel bars in:
Rebar fabrication workshops
Precast concrete plants
Construction sites producing cut-to-length bars
Reinforcing steel for structural work
4. Operation Guide
Set up the machine on a level, stable surface and verify the power supply.
Feed the steel bar into the straightening rollers according to the threading guide.
Set the cutting length on the control panel.
Start the machine and monitor the first few pieces to confirm straightness and length.
Adjust settings as needed and continue production.
Note: Do not feed bars beyond the rated straightening diameter range. Feeding oversized bars may damage the rollers and cutting unit.
5. Safety Instructions
Warning: This machine has rotating rollers and a cutting unit. Serious injury can occur if misused.
Operate the machine only after reading this manual and receiving proper training.
Wear safety goggles, gloves, and protective clothing when operating.
Keep hands and loose clothing away from the feed rollers and cutting area.
Disconnect power before cleaning, adjusting, or maintenance.
Never operate the machine with safety guards removed.
Use only genuine Creare replacement parts.
6. Maintenance
Inspect the straightening rollers and cutting blades before each shift.
Lubricate rollers and bearings according to the maintenance schedule.
Check drive belts and fasteners periodically.
Keep the machine clean and free of scale and debris.
Store the machine in a dry, covered area when not in use.
